|
The following is a list of equipment that our FEF Accredited Schools are in need of. If you can help, please contact the Key Professor directly. Click here for suggested policies for donating equipment.
Click here to go to the web page with professor phone numbers and emails.
Schools’ Equipment Needs List – 3/04
1. Cal Poly Pomona—non- destructive testing-any type/rapid prototyping/small investment casting press/sand testing-moisture, compactability scale/snap flasks & jackets (12"x12", 12"x18")
2. Cal State Chico—induction furnace/investment casting equipment
3. Central Washington—50 lb/min. Resin-bond Continuous mixer (Carver – Maxi-Mul. MM-50 SA)/Small 10-20# crucible – Swing type Induction Pedestal only/Heat treat-temper ovens, gas or electric
4. Kent State—investment casting/sand testing
5. Kettering—2 nd jolt squeeze machine
6. Missouri Rolla—new induction furnace/sand testing equip/better investment capability
7. Mississippi State—rapid prototyping/small induction furnace/green strength & permeability testers/small jolt-squeeze molding machine/green strength and permeability determinators, plus a set of screens with a shaker
8. Mohawk College—x-ray spectrometer
9. Ohio State—high speed resin-bonded mold mixer and blower system
10. Penn State—small vibratory tumbler for finishing castings/1000 lb copper base alloy ingots/metallographic, image analysis system
11. Purdue Indianapolis—AFS Solids or Magmasoft/slightly larger furnaces
12. Tennessee Tech—complete sand lab and metal lab
13. Texas State—image scanning/macroscopic inspection/more appropriate shell mold system
14. Western Michigan—100-150 KW induction furnace/nondestructive testing/Magma Flux
15. Windsor—automated hardness tester
16. Wisconsin Milwaukee—ultrasonic equip to characterize castings
17. Wisconsin Platteville—sand blowing system to move new sand to hopper/jolt squeeze machine/mold rollers/image analysis/spectrometer/flasks/ Al XXL pouring jackets
|
