Headquarters
2222 Hammond Drive;  Schaumburg, Illinois 60196
Tel:  (847) 397-5120;  Fax:  (847) 397-8254

Personnel
Bill Hunter, President
Bill Nimmo, V.P., Sales
Rod Hartung, Regional Sales Mgr.
Dean Martin, Regional Sales Mgr.
Peter Li, Regional Sales Mgr.
Mario Nunez, Sales Engineer
Joe Hughes, V.P., Service
Mike Hughes, Regional Service Mgr.
Kathy Meredith, Parts Dept. Mgr.

Sales Offices
Represented by over 80 professional sales agents throughout the world.

A Brief History
The company was founded in 1964 by Al Hunter, who still serves as Chairman of the Board.  The first machine came off the drawing board in the same year, and was designed to accept existing matchplate patterns of the size being used by most hand molders.  The molding machine has evolved over the years with many refinements and technological improvements, leading to its present G&H Series machines.

Products
Automatic Matchplate Molding Machines
HMP-10G
14" x 19" 5-1/2" / 4-1/2"
355mm x 483mm 140/114mm
HMP-20G/H (Deep Flask)
20" x 24" 8-1/2" / 7-1/2"
508mm x 610mm 216 / 190mm
HMP-32H (Deep Flask)
30" x 32" 12" / 11"
762mm x 813mm 305 / 279mm

• High pressure, high density, horizontally parted automatic molding.

• Flasks are filled by gravity as the molding sand passes through an automatic high speed riddle.

• Cope and drag molds are squeezed simultaneously by hydraulic pressure.

• The pattern is subjected to high intensity vibration  during the fill, squeeze, and draw portion of the molding sequence.

Features:

• High mold quality - increased hardness and uniformity.

• Makes difficult castings and maintains close tolerances.

• High reliability - low downtime and maintenance.

Automatic Coresetters

• Fast cycle rates increase production dramatically.

• Multiple, complex, or heavy cores can be set accurately.

Turntable Mold Handling Systems

• Different diameters available to suit individual customer requirements.

• A choice of 1, 2, or 4 levels of in-mold cooling are available.

• Setting of weights and jackets is fully automated and extremely precise.

• Cooling times accurately controlled for improved casting quality.

• Single station pouring means less spilled metal and related scrap.

• Integral fume containment hood improves the working environment.

Linear Mold Handling Systems

• Double-Deck Pouring Line; length to suit individual requirements.

• Precise automatic setting of weights and jackets.

• Double-Deck Cooling Line; length to meet any cooling time requirement.

• Inexpensive to purchase, ship, install, and operate.

• Hydraulically powered for smooth, reliable operation.